| Step 1: |
First, remove brake oil input pipe from Brake Caliper. |
| |
|
| Step 2: |
Screw oil pipe end to the top of Saferide Adaptor. Use adequate washers to ensure leak proof joint. |
| |
|
| Step 3: |
Attach side end of Saferide Adaptor to Brake Caliper with the help of stud, nut and rubber O-ring provided with the pack. |
| |
|
| Step 4: |
After complete assembly, open slightly the oil drain plug (grease nipple covered with rubber cover) of the Brake Caliper. Pump the brake lever for several times. This will help entire line to be filled up with Brake oil and help removal of air from the line. |
| |
|
| Step 5: |
Once oil starts coming out of the nipple, immediately tighten it and put back the rubber cover. |
| |
|
| Step 6: |
Now the brake is up and running. Enjoy your SAFE ride ! |
